How to replace flint in kerosene lighter

How to replace flint in kerosene lighter

Kerosene lighters are essential tools for many smokers and collectors, but after a period of use, the wear of the flint will make it difficult to start a fire. This article will introduce in detail how to replace the flint of a kerosene lighter, and attach recent hot topics and hot content for readers’ reference.

1. Steps to replace flint

1.Preparation tools: A new flint, small screwdriver or special tool.

2.Disassemble lighter: Gently unscrew the bottom screw of the lighter and take out the old flint.

3.Clean up the residue: Use tools to clean the residue in the flint groove to ensure that the new flint is installed smoothly.

4.Install new flint: Place the new flint into the slot and press gently to the bottom.

5.test ignition: Tighten the screws and test the ignition effect.

2. FAQs

1.Flint does not spark after installation?: Check whether the flint is installed in place, or try to adjust the tightness of the flint spring.

2.Flint wears out too quickly?: It may be that the quality of the flint is not good. It is recommended to buy branded flint.

3. Recent hot topics and hot content

The following is a summary of hot topics and content on the Internet in the past 10 days:

4. Maintenance tips for kerosene lighters

1.Clean regularly: Clean the inside of the lighter once a week to avoid accumulation of oil stains.

2.Use high quality kerosene: Low-quality kerosene will damage the life of lighters.

3.Avoid high temperature environment: High temperature will cause kerosene to evaporate too quickly.

5. Summary

Replacing the flint in a kerosene lighter is not complicated, just follow the steps. At the same time, paying attention to recent hot topics can enrich your social conversation. Hope this article helps you!

If you have any questions, please leave a message in the comment area for discussion.