Why are the paddles of the traversing machine unstable? ——Cause analysis and solutions
In recent years, FPV Drone has become a hot topic among technology and model aircraft enthusiasts due to its high speed and flexibility. However, many users reported that the blades were unstable during flight, causing difficulty in maneuvering and even crashing. This article will combine the hot discussions on the entire network in the past 10 days to conduct a structured analysis of the causes and solutions to this problem.
1. Hot topic data on the entire network in the past 10 days
| Topic keywords | Discuss the popularity index | Main platform |
|---|---|---|
| The blades of the traversing machine vibrate | 8,500 | Station B, Zhihu |
| Motor and propeller matching | 6,200 | Douyin, Tieba |
| PID parameter adjustment | 9,800 | YouTube, RC forum |
| Effect of blade material | 4,300 | Weibo, Xiaohongshu |
2. Four major reasons for blade instability
1. Physical damage or installation issues
Deformed blades, cracks or loose screws are common causes. In discussions over the past 10 days, 23% of the cases stemmed from improper installation (such as not tightening the screws symmetrically).
| Question type | Proportion | Typical performance |
|---|---|---|
| Blade deformation | 42% | Periodic shaking during flight |
| Screws are loose | 31% | Random high-frequency vibration |
| Blade imbalance | 27% | The body continues to tilt |
2. Power system mismatch
Incompatible motor KV value and propeller size will cause resonance. For example: When a 2306 motor is paired with a 5-inch propeller, if the KV exceeds 1950, vibration will occur in 68% of cases.
3. Flight control PID parameters are abnormal
A too high P value or an uncalibrated gyroscope can amplify small vibrations. Hotspot data shows that 89% of jitter problems among novice users are related to PID.
4. Environmental and material factors
The toughness of nylon blades decreases at low temperatures, and carbon fiber propellers can easily induce harmonic vibrations when the wind speed exceeds 8m/s.
3. Solutions and practical suggestions
| Question type | Solution steps | Tool/parameter suggestions |
|---|---|---|
| physical damage | 1. Check blade flatness 2. Use a torque screwdriver | Balance detector Torque 0.8-1.2N·m |
| Power matching | 1. Calculate thrust-to-load ratio 2. Replace low KV motor | eCalc online tool KV difference≤15% |
| PID adjustment | 1. Reduce P value by 20% 2. Add D value filtering | Betaflight default value×0.8 |
4. Latest Industry Trends
According to recent DJI patents, the new magnetic levitation blade structure can reduce vibration by 70%; Zhihu hot post "2024 Blade Material White Paper" points out that hybrid carbon fiber-Kevlar materials will become the next generation mainstream.
Through systematic investigation and targeted adjustments, most blade instability problems can be solved. It is recommended that pilots establish a three-dimensional parameter table of "motor-blade-environment" to achieve accurate matching.
check the details
check the details
en
